Electrical Invoice Template (Free, Word + Google Docs)

An electrical invoice template should show your business and license number, the customer, job address, permit number, service call fee, labor, wire, breakers and other materials, permit fees, change orders, deposits or progress payments, warranty and the balance due. Copy it below or download the Word version.
An electrical invoice has to hold up to more questions than most trade invoices. The homeowner wants to know why a "simple" outlet repair took two hours. The general contractor wants the change order number before they'll pay. And the inspector's sign-off, the permit number and the breaker brand all matter again the day someone sells the house or calls you back about a tripping circuit. A good electrical invoice answers those questions before anyone picks up the phone.
Key Takeaways
Put your electrical contractor license number and the permit number on every invoice. Some states require the license number on contracts and bids, and customers and inspectors look for both.
Bill labor one way per job type: hours times your labor rate for troubleshooting, a flat price for repeat tasks like circuits, devices and EV charger installs.
List wire, breakers, devices and panel equipment on separate lines with type, size and quantity, so the customer can see what went into the wall.
Bill change orders and progress payments as numbered lines that match the signed paperwork, never as a surprise total at the end.
Aim to send every service invoice the same day the work is done, and every project invoice within 1 business day of the final inspection.
What should an electrical invoice include?
Every electrical invoice needs these 12 parts:
Your business details: business name, address, phone, email, website and your electrical contractor license number and state.
Customer details: name, billing address, email and phone. For commercial accounts and general contractors, add the company name and the PO or contract number.
Job address: where the work was done. Property managers and builders often pay for many addresses from one account.
Invoice number and dates: invoice date, service or work dates and due date.
Electrician: who did the work, with their license or certification type and number if your state or the customer asks for it.
Permit and inspections: permit number and issuing city or county, plus rough-in and final inspection dates when the job needed a permit.
Problem reported and work performed: the customer's complaint in plain words, what the electrician found and what was fixed or installed.
Line items: service call fee, labor (by the hour or flat rate), wire, breakers, devices and fixtures, panel or service equipment, other materials and permit fees, each on its own line.
Change orders: each approved change with its number, a short description and the approval date.
Sales tax: a separate line, if your state taxes materials, labor or both.
Deposits and progress payments: deposit received, earlier progress invoices and the balance left to pay.
Warranty, terms and how to pay: workmanship warranty, manufacturer warranty on equipment, due date, payment options and any late fee you've agreed to in writing.
Keep a copy of every invoice once it's paid. The IRS lists invoices among the supporting documents for a business's gross receipts and its purchases.
Free electrical invoice template

Copy this into a document, or download the Word template. For Google Docs, save the Word file to your Google Drive and double-click it to open it in Google Docs.
[YOUR LOGO]
[YOUR BUSINESS NAME] [Address] · [Phone] · [Email] · [Website] · Electrical contractor license no. [number], [state]
INVOICE
Invoice details | |
Invoice number | [0001] |
Invoice date | [Date] |
Service date | [Date of visit, or work dates] |
Due date | [Date, or Due on completion] |
Bill to | [Customer name, company, billing address, email, phone] |
Job address | [Property address, unit or suite] |
Work order, PO or contract | [Work order number, customer PO, or contract number for larger jobs] |
Electrician | [Name, license or certification type and number, if your state or customer asks for it] |
Permit | [Permit number, issuing city or county], or Not required |
Problem reported: [For example: kitchen outlets dead, breaker trips when the microwave runs.]
Work performed: [For example: traced fault to a failed receptacle, replaced receptacle with GFCI, tested circuit under load.]
Inspections: Rough-in [passed, date]. Final [passed, date]. Inspector or reference: [name or number].
Description | Qty or hours | Rate | Amount |
Service call or trip fee: [credited toward the repair, if your policy says so] | [1] | [fee] | [amount] |
Labor: [task description], [regular or after-hours] rate | [hours] | [rate] | [amount] |
Flat-rate task: [for example, install EV charger circuit, add 20A kitchen circuit] | [qty] | [price] | [amount] |
Wire: [type and gauge, for example 12/2 NM-B or THHN], [feet] | [feet] | [price] | [amount] |
Breakers: [brand, amps, type: standard, AFCI, GFCI or dual function] | [qty] | [price] | [amount] |
Devices and fixtures: [receptacles, switches, fixtures, supplied by you or the customer] | [qty] | [price] | [amount] |
Panel or service equipment: [make, model, amps, meter base, disconnect] | [1] | [price] | [amount] |
Other materials: [conduit, boxes, fittings, grounding] | [qty] | [price] | [amount] |
Permit and inspection fees (pass-through), permit no. [number] | [1] | [cost] | [amount] |
Re-inspection fee, if one applied | [1] | [cost] | [amount] |
Change order no. [number]: [description], approved [date] | [1] | [price] | [amount] |
Subtotal | [amount] | ||
Less service call credit | -[amount] | ||
Sales tax, if it applies | [amount] | ||
Total | [amount] | ||
Less deposit received [date] | -[amount] | ||
Less progress payments, invoices [numbers] | -[amount] | ||
Balance due by [date] | [amount] |
Progress billing summary (larger jobs only)
Contract billing | Amount |
Original contract amount | [amount] |
Approved change orders to date | [amount] |
Revised contract amount | [amount] |
Work completed to date ([%] complete) | [amount] |
Retainage held, if your contract has it | -[amount] |
Less previous invoices | -[amount] |
Amount due this invoice | [amount] |
Warranty: Workmanship warranty [length] from [date] on the work above. Manufacturer warranty on [equipment, for example panel or EV charger]: [length], registered [date, if registration applies].
Recommendations: [For example: panel has no open spaces; service upgrade estimate [number] sent separately.]
How to pay: [Payment link, card, ACH or bank transfer, or check instructions].
Terms: [Due on completion, or Net 15 or Net 30 for commercial accounts]. Late payments: [your late fee, if any, as stated in your estimate or contract].
Customer signature (work completed): ______________________ Date: __________
Thank you for choosing [business name].
Delete any line you don't use. A GFCI swap needs four or five lines; a 200-amp service upgrade with a permit, a change order and a deposit needs most of them.
Should electricians bill by the hour or at a flat rate?
Use both, but pick one method per type of job and show it the same way every time. Troubleshooting, where nobody knows how long the fault will take to find, fits hours times your labor rate. Repeat tasks with a known scope, like adding a circuit, swapping a panel or installing an EV charger circuit, fit a flat price.
Here's how each shows on the invoice:
Job type | How to bill it | How it shows on the invoice |
Troubleshooting a tripping breaker or dead circuit | By the hour | Labor line with hours and your labor rate, plus the service call fee |
Device swaps (receptacles, switches, GFCIs) | Flat rate | One flat-rate line per task, with the quantity |
New circuit, EV charger circuit, subpanel | Flat rate | Flat-rate line, with wire and breakers listed below it if your customers expect to see materials |
Panel or service upgrade | Flat rate from the estimate | Flat-rate or contract line, plus permit fees and any change orders |
After-hours emergency call | By the hour, after-hours rate | Labor line labeled after-hours, so the higher rate isn't a surprise |
Whichever you use, the invoice should match the estimate the customer approved. If the price on the invoice differs from the estimate, there should be a change order line explaining why.
How do you list permits and inspection fees on an electrical invoice?
List the permit fee as a pass-through line with the permit number, and put the inspection dates in the job details. That shows the customer the work was permitted and inspected, which they'll need when they sell the house or file an insurance claim.
Many cities limit who can pull an electrical permit. Boston, for example, tells homeowners planning a service upgrade that they need to hire a contractor who can apply for the electrical permit and perform the work, and that only a contractor with a valid Massachusetts trade license may apply for it. If you pulled the permit, the fee is your cost to pass through, so show it at cost on its own line rather than folding it into labor.
Three habits keep permit lines clean:
Write the permit number on the invoice, not only in your files. It's the first thing a buyer's inspector or the customer's insurer asks for.
Bill a failed inspection separately. If the city charges a re-inspection fee because of something on your side, decide your policy once. If it was caused by the customer (for example, drywall closed before rough-in), bill it as its own line with a note.
Don't send the final invoice on a permitted job until the final inspection passes, unless your contract says otherwise. An invoice with "Final: passed [date]" on it gets paid faster than one that leaves the customer wondering.
Your license number belongs at the top of every invoice too. California, for example, requires licensed contractors to include their license number on construction contracts, subcontracts, calls for bid and advertising. Check your own state's licensing board for its rules.
How do you invoice a panel or service upgrade?
Invoice a panel or service upgrade in two parts: a deposit invoice when the customer signs the estimate, and a final invoice after the final inspection that subtracts the deposit. The final invoice is the one the homeowner keeps, so it needs the equipment details and inspection dates on it.
For a service upgrade, the final invoice should show:
The new panel and service equipment, with make, model and amperage (panel, main breaker, meter base, disconnect, surge protector if installed).
Labor, as one flat-rate line from the estimate or as hours, the way you quoted it.
Breakers and materials, listed by type and quantity, especially AFCI and GFCI breakers, which customers often ask about.
Permit and inspection fees, at cost, with the permit number.
Utility coordination, if your utility charges for disconnect and reconnect or you bill time for the meeting, as its own line.
Change orders, for example circuits that had to be brought up to code once the panel was open, each with its number and approval date.
Deposit received and the date, as a minus line.
Warranty notes: your workmanship warranty, plus the manufacturer warranty on the panel and any surge protector.
If you find something during the job that changes the price, stop and get a signed change order before you do the extra work. The final invoice should never be the first time the customer hears about it.
How do you bill change orders on an electrical job?
Bill each change order as its own numbered line, with a short description and the date the customer or general contractor approved it. The number on the invoice should match the number on the signed change order, so nobody has to guess which extra they're paying for.
On electrical jobs, change orders usually come from:
Extra circuits or devices the customer adds once they see the work
Code items found after walls or panels are opened, like missing grounding or overloaded circuits
A general contractor moving fixture or outlet locations after rough-in
Customer-supplied fixtures that don't fit or don't work, and need extra labor
Get every change approved in writing before the extra work starts. In California, for example, the state licensing board says a change to a home improvement contract's price or scope must be done with a written change order signed by the customer and contractor before the change. Keep a running list of approved change orders on the job, and add the total to the progress billing summary on larger projects. When a general contractor disputes an invoice, the signed change order with a matching number is the fastest way to settle it.
How does progress billing work for larger electrical jobs?
On larger jobs, like new construction, tenant improvements or a whole-house rewire, you bill in stages instead of one invoice at the end. Each progress invoice shows the contract amount, approved change orders, the percentage complete, what's been billed before and what's due now. The progress billing summary in the template above follows that order.
Common billing points for electrical work are the deposit at signing, rough-in after it passes inspection, trim-out and the final after the final inspection. Agree on the stages in the contract before the job starts, and send each progress invoice the day the stage is done.
If your general contractors hold retainage or ask for lien waivers with each payment, our contractor invoice template covers draws, retainage and lien waivers in more detail.
What warranty should go on an electrical invoice?
Put your workmanship warranty and its length on the invoice, plus the manufacturer warranty on any major equipment you installed, like a panel, an EV charger or a whole-house surge protector. The invoice is the document most customers keep, so it's the easiest place for them to find the warranty later.
Write the warranty in plain words:
What's covered: your labor and installation on the work listed on the invoice.
How long: the length you offer, starting from the completion date.
What's not covered: for example, damage from work done by others, or fixtures the customer supplied.
Manufacturer warranty: the equipment, the length and whether it needed registering.
When a customer calls about a tripping breaker months later, the invoice with the breaker type, the work date and the warranty terms on it tells your office in a minute whether it's a warranty visit or a paid call.
When should you send an electrical invoice?
Send service invoices the same day, ideally before the electrician leaves the job, and send project invoices as soon as each billing stage is done. The longer an invoice waits, the more details get lost: hours get rounded, the breaker count gets guessed and change orders get forgotten. Use these suggested targets to measure your own routine:
Step | Suggested target |
Service invoice sent | Same day as the visit |
Deposit invoice sent | Same day the customer signs the estimate |
Progress invoice sent | Within 1 business day of the stage passing inspection |
Final invoice sent | Within 1 business day of the final inspection |
Change order added to the invoice | Same day it's approved |
First reminder | 3 days before the due date, or 1 day after for due-on-completion |
Here's a short email to send with a service invoice:
Hi [First name], thanks for having us out today. [Electrician] found the problem with your [circuit or device] and fixed it, and everything tested normally before we left. Your invoice [number] is attached: [amount] due by [date]. You can pay here: [link]. The permit, inspection and warranty details are on the invoice for your records. [Your name]
How do you save this electrical template for every job?
Set it up once as a master file, then make a copy for each job, so no customer gets an invoice with someone else's permit number on it.
In Word:
Open the template and add your logo, business details, license number and standard warranty and payment terms.
Go to File, then Save As, and choose Word Template in the file type list.
For each job, open a new document from that template and save it as the customer's last name, job address and invoice number.
In Google Docs:
In Google Drive, double-click the Word file to open it in Google Docs, then add your logo and details.
For a general contractor or property manager you bill often, start from a copy of their last invoice, so the billing details and PO format carry over.
A Word template works for a small shop. Once your electricians close jobs on tablets in ServiceTitan, Housecall Pro or Jobber, the same fields (permit number, inspection dates, breaker types, change order numbers) should become required fields in the job record, so no invoice goes out without them.
Who should handle your electrical invoicing?
If you're checking and fixing invoices at night after a full day on job sites, invoicing is one of the first things to hand off. Your Startup Operations places full-time virtual assistants for home service businesses who work inside the tools you already use, like ServiceTitan, Housecall Pro, Jobber or QuickBooks.
Laguna Electric, a California electrical contractor doing commercial and residential work, had invoicing errors and payments duplicated or misapplied in QuickBooks before YSO placed a trained assistant to own invoicing and payment tracking. After that, the team saved 30 to 40 hours a week, cut billing stress by 50% and got invoicing errors down to near zero, according to the Laguna Electric case study. As Georgia at Laguna Electric put it: "Manuel saves a lot of time for me. I can finally focus on accounting, planning, and growing the business instead of checking and redoing invoices every night."
Your assistant can:
Build each invoice from the electrician's job notes, hours and photos, and flag missing permit numbers or material counts before it goes out
Add approved change orders and keep the progress billing summary current on larger jobs
Track deposits, progress payments and retainage, and send the final invoice once the inspection passes
Reconcile field crew hours from your time tracking app, like BusyBusy, against the labor on each invoice
Answer and return customer calls about invoices, and send reminders and overdue follow-ups by email and text
Match payments in QuickBooks and keep your unpaid list current
You keep your pricing, your warranty terms and any decision about a disputed bill. Before any assistant starts, we map how you work and turn it into SOPs you own, because you cannot hand off what's never been written down. For more on what an assistant can take on across scheduling, estimates and office-to-field updates, see our guide to a virtual assistant for electrical contractors.
Frequently Asked Questions
How do I make an electrical invoice?
Add your business details and license number, the customer, job address, invoice number and dates, and the permit number if there is one. List the work performed, then the service call fee, labor, wire, breakers, devices, equipment, permit fees and change orders. Subtract deposits and progress payments, then state the balance, due date and how to pay.
Should I put my license number on an electrical invoice?
Yes. Some states require the license number on contracts, bids and advertising, and having it on the invoice too tells customers, general contractors and inspectors who did the work. Check your state licensing board for its exact rules.
How do electricians charge for labor on an invoice?
Most use hours times a labor rate for troubleshooting and a flat price for tasks with a known scope, like device swaps, new circuits and panel upgrades. Show the method clearly on each line and match it to the approved estimate.
How do I bill a change order on an electrical invoice?
Add it as its own line with the change order number, a short description and the approval date. The number should match the signed change order.
When should I invoice a permitted electrical job?
Send the deposit invoice when the customer signs, progress invoices as each stage passes inspection, and the final invoice after the final inspection, unless your contract sets different billing points.
Can I use this electrical invoice template in Google Docs?
Yes. Save the Word file to Google Drive, double-click it to open it in Google Docs, then make your own copy.
Stop redoing electrical invoices at night
A clear invoice gets each job paid. A system gets every invoice out right, the day the work or the inspection is done. Your Startup Operations runs a time audit, documents your billing process and places a trained assistant to run it, with a 90-day onboarding plan.
About Your Startup Operations
Your Startup Operations (YSO) is a Women-Owned Small Business (WOSB) certified, white-glove operations agency co-founded by Jenna Henao and Alexis Schomer. YSO helps event business owners and other service-based companies step out of daily operations by installing a dedicated Ops Assistant trained specifically for their business, typically helping owners reclaim 30–40 hours per week.
YSO has been featured in Forbes, Voyage LA, Authority Maximizer, EIN Presswire, and AP News.
Explore our event vendor ops services, see client outcomes on our case studies page, or get in touch to talk through what your business needs.
About the Author

Alexis Schomer is the Co-Founder and Marketing & Operations Expert at Your Startup Operations. She works with business owners to optimize operations, improve delegation, and build scalable systems that support sustainable business growth. Drawing on her experience in marketing, entrepreneurship, and business operations, Alexis believes effective delegation is about more than hiring a virtual assistant. It starts with selecting the right person, creating efficient workflows, establishing clear expectations, and providing the training and support needed for teams to succeed. This practical, systems-first philosophy guides every client partnership at YSO. Connect with Alexis on LinkedIn.
Reviewed by

Jenna Henao is the Co-Founder and Operations Expert at Your Startup Operations. She partners with business owners to streamline operations, strengthen workflows, and build reliable teams that drive long-term growth. With a background in entrepreneurship and business operations, Jenna has led initiatives across HR, finance, recruitment, operations, sales, marketing, and team leadership. She has helped businesses grow from six to seven figures by developing scalable systems, recruiting outstanding talent, and implementing processes that support lasting success. Connect with Jenna on LinkedIn.
Free Resources
Access practical tools, templates, and SOPs designed to simplify operations, improve delegation, and support business growth.

25 Tasks You Can Offload To Your VA Today
Your day fills up fast with follow-ups, inbox replies, scheduling, and admin.
This guide
shows exactly
what to hand
off first so
you can
stop doing it all yourself and
free up
real time.

The Ultimate Productivity Toolkit for Event Professionals
Managing clients, coordinating vendors, and handling daily administrative tasks can quickly fill your schedule. This toolkit shares five practical ways a virtual assistant can help streamline your workload so you can spend more time growing your business.

How to Send a Certificate of Insurance (COI)
Submitting a Certificate of Insurance doesn't have to be complicated.
This SOP
provides a clear, step-by-step process to help you submit accurate COIs, avoid delays, and keep approvals moving forward.
%20(1).png)



